系所与团队：

电机与电器研究所

学术身份：

博士/硕士生导师、中国电源协会电气化交通专委会委员

主要工作经历：

2013.03至今 山东大学电气工程学院

2018.12-2019.11法国国立高等工程技术大学(ENSAM)访问学者

2011.09-2012.08 法国国立高等工程技术大学(ENSAM)助教(A.T.E.R)

第八届山东大学“青年教学能手”

2016年度山东大学青年教师课堂比赛“二等奖”

研究方向：

先进电驱动系统研究与设计：

1.运行高可靠性多相电机系统设计、故障诊断和容错控制

2.高性能永磁驱动系统无位置传感器控制研究

3.新型异步起动永磁同步电机拓扑结构及建模研究

学术著作：

期刊论文：

[1] J. Gong, J. Zhang, X. Wang, N. K. Nguyen, A Robust Full Speed Position-Sensorless Control for a Non-sinusoidal Seven-phase Permanent Magnet Machine, IEEE Transactions on Transportation Electrification, 2025.

[2]H. Zhao, J. Gong*, F. Tan, E. Semail, N. K. Nguyen, N. Bracikowski, F. Gillon, Design, Analysis and Control of a Low Speed and High Torque Five-phase External Rotor Permanent Magnet Synchronous Machine for Direct Drive Application, IEEE Transactions on Energy Conversion, 2024.

[3]J. Gong, X. Wang, B. Zhao, F. Tan, E. Semail, N. Nguyen, N. Bracikowski, Design, Analysis of a Seven-Phase fault-tolerant Bi-Harmonic Permanent Magnet Machine with Three Active Air Gaps for In-Wheel Traction Applications, IEEE Transactions on Energy Conversion, Vol. 39, no. 1, , March 2024, pp. 263-276.

[4]J. Gong, H. Zahr, E. Semail, M. Trabelsi, B. Aslan, F. Scuiller, Design Considerations of Five-Phase Machine with Double p/3p Polarity. IEEE Transactions on Energy Conversion, Vol. 34, No. 1, March 2019, pp.12-24.

[5]J. Gong, B. Zhao, Y. Huang, E. Semail, N. Nguyen, Quantitative Comparisons of Outer-Rotor Permanent-Magnet Machines of Different Structures/Phases for In-Wheel Electrical Vehicle Application, Energies 2022, 15(18), 6688; pp. 1-19.

[6]B. Zhao, J. Gong* et al, A Novel Five-Phase Fractional Slot Concentrated Winding with Low Space Harmonic Contents, IEEE Transactions on Magnetics, Vol. 57, No. 6, June 2021.

[7] J. Gong, H. Zhang, B. Zhao, D. Fu, F. Gillon, Proposal of a Bi-Objective Kriging Adapted Output Space Mapping Technique for Electromagnetic Design Optimization, IEEE Transactions on Magnetics, Vol. 55, No. 6, June 2019.

[8]J. Gong, F. Gillon, N. Bracikowski, Comparison of three space mapping techniques on electromagnetic design optimization. International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 37, No. 2, pp. 1-14, Feb. 2018.

[9] J. Gong, F. Gillon, J. T. Canh and Y. Xu, Proposal of a Kriging Output Space Mapping Technique for Electromagnetic Design Optimization. IEEE Transactions on Magnetics, Vol. 53, No. 6, June 2017.

[10] H. Zahr, J. Gong*, E. Semail, F. Scuiller. Comparison of Optimized Control Strategies of a High-speed Traction Machine with Five Phases and Bi-harmonic Electromotive Force. Energies, Vol. 9, No. 12, pp. 952. December 2016.

[11] Jinlin Gong*, Bassel ASLAN, Eric SEMAIL, Frédéric GILLON. High speed functionality optimization of five-phase pm machine using 3rd Harmonic Current. International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 31, No. 3, pp. 879-893, ISBN: 0332-1649, May, 2014.

[12] Jinlin Gong*, Alexandru Claudiu BERBECEA, Frédéric GILLON, Pascal BROCHET. Multi-objective Optimization of a Linear Induction Motor using 3D FEM. International Journal for Computation and Mathematics in Electrical and Electronic Engineering. Vol. 31, No. 3, pp. 958-971, ISBN: 0332-1649, May, 2012.

部分会议论文：

[1] H. Zhao, J. Gong*, D. Hao, H. Sun, N. Nguyen, N. Bracikowski. Vibration and noise analysis of non-sinusoidal multi-phase permanent magnet synchronous machine with fractional slot concentrated winding. 2024 Annual Conference of the IEEE Industrial Electronics Society, (IECON 2024), Chicago, America.

[2] H. Sun, J. Gong*, H. Zhao, D. Hao, E. Semail, N. Nguyen. Improved Advanced Angle Field Weakening Control Strategy for Multi-phase PMSM. 2024 Annual Conference of the IEEE Industrial Electronics Society, (IECON 2024), Chicago, America.

[3] D. Hao, J. Gong*, H. Zhao, H. Sun, N. Nguyen, N. Bracikowski. Comparative Study of axial flux machines with different winding structures. China International Youth Conference on Electrical Engineering (CIYCEE 2024), Wuhan, China.

[4] X. Wang, J. Gong*, Y. Huang, E. Semail, N. Nguyen, L. Peng, High Quality Sensorless Control Strategy for Seven-phase PMSM in Full Speed Range, 2023 International Conference on Electrical Machines and Systems (ICEMS 2023), Zhuhai, China.

[5] X. Li, J. Gong*, X. Wang, N. Bracikowski, F. Gillon. Proposal of a Novel Line-Start Permanent Magnet Synchronous Machine Using Fractional Slot Concentrated Winding, 2023 International Conference on Electrical Machines and Systems (ICEMS 2023), Zhuhai, China.

[6] Jinlin Gong, Benteng Zhao, Fei Tan et al, Seven-phase axial and radial flux in-wheel machine with three active air gaps, XXVth International Conference on Electrical Machines (ICEM), September, 2022, Spain.

[7] Fei Tan, Jinlin Gong* et al, Optimal Design of a Five-phase External Rotor Permanent Magnet Machine for Convey Application, XXVth International Conference on Electrical Machines (ICEM), September, 2022, Spain.

[8] Youxi Huang, Jinlin Gong* et al, Sensorless Control of a Seven-phase Non-sinusoidal Permanent Magnet Synchronous Machine Using High Frequency Signal Injection Method. IEEE 4th Student Conference on Electric Machines and Systems, Dec., 2021, Huzhou, China.

[9] Yifeng Zhu, Jinlin Gong*, High quality Open-circuit Fault Tolerant Control of a Bi-harmonic Seven-Phase Permanent Magnet Synchronous Machine. IEEE 4th Student Conference on Electric Machines and Systems, Dec., 2021, Huzhou, China.

[10] B. Zhao, Jinlin Gong*, Y. Xu, E. Semail, N-k, Nguyen, N. Bracikowski, High Performance Evaluation of a Novel Topology of Five-Phase Fractional Slot Concentrated Non-Overlapping Winding, International Magnetics Conference, May, 2020, Canada.

[11] V. Martin, Jinlin Gong*, B. Zhao, F. Gillon, Y. Xu, Cogging Torque Minimization of an Interior Permanent Magnet Machine Using Sub-domain Method, IEEE Conference on Electromagnetic Field Computation, Nov. 2020, Italy.

[12] B. Zhao, Jinlin Gong*, T. Tong, Y. Xu, E. Semail, N-k, Nguyen, F. Gillon, A Novel Five Phase Fractional Slot Concentrated Winding with Low Space Harmonic Contents, IEEE Conference on Electromagnetic Field Computation, Nov. 2020, Italy.

[13] Zhang Hao, Zhao Benteng, Jinlin Gong*, Xu Yanliang, Duc Tan Vu, Ngac Ky Nguyen, Eric Semail, Tiago Jose dos Santos Moraes, Torque Optimization of a Seven-Phase Bi-harmonic PMSM in Healthy and Degraded Mode, International Conference on Electrical Machines and Systems (ICEMS), 8-2019, Harbin, China.

[14] Keitaro Yanagihara, Duc Tan Vu, Ngac Ky Nguyen, Jinlin Gong*, Eric Semail1, Tiago Jose dos Santos Moraes, Fault-tolerant Control for Non-sinusoidal 7-phase Permanent Magnet Machines with One Opened Phase, International Symposium on Electrical and Electronics Engineering (ISEE 2019), October 10-12, 2019, Ho Chi Minh City, Vietnam.

[15] B. Zhao, J. Gong*, D. T. Vu, N. Nguyen, and E. Semail, Fault Tolerant 7-phase Hybrid Excitation Permanent Magnet Machine. IEEE Conference on Electromagnetic Field Computation, Oct. 2018, China.

[16] Jinlin Gong* et al. Optimal Design of a Linear Induction Motor for Traction Application. International Conference on Electrical Engineering and Automatic Control (ICEEAC), 10-2015, Weihai, China.

[17] Jinlin Gong*, Nicolas BRACIKOWSKI, Xiuhe WANG. Magnetic modeling of a liner motor using lumped approach. International Conference on Electrical Machines and Systems (ICEMS), 10-2014, Hangzhou, China.

[18] Jinlin Gong* et al. Fast Optimization of a Linear Induction Motor by 3-Level Space Mapping Technique. 9th International Symposium on Linear Drives for Industrial Applications (LDIA). 7-2013, Hangzhou, China.

[19] Jinlin Gong*, Frédéric Gillon, Pascal Brochet. Optimal Design of a Linear Induction Motor for Subway System Using Finite Element Method. International Conference on Electrical Machines and Systems (ICEMS), 8-2011, Beijing, China.

[20] Jinlin Gong*, Alexandru Claudiu Berbecea, Frédéric Gillon, Pascal Brochet. Magnetic and Thermal 3D Finite Element Model of a Linear Induction Motor. Vehicle Power and Propulsion Conference (IEEE VPPC), Sep. 1-3, 2010, Lille, France.

主要科研项目：

主持的部分在研项目：

国家自然基金面上项目：广域高效多相多极性永磁电机系统设计与可靠性控制研究

GF预研项目：XXXXXX研究

企业委托：大功率永磁直驱系统设计与控制研发

主持的部分结题项目：

国家自然基金青年项目、山东省自然基金面上项目、教育部留学人员科研启动基金、山东省重点研发计划

招生类型：

已成功推荐1名毕业生至法国攻读博士学位，2名中法联合培养博士生，5名法国里尔中央理工大学工程师学生毕业实习